Hand Held 2 Pollution Degree Digital Laser Distance Meter
Waterproof Production Class
Precautions:
Only use this product as a measuring sensor, not as a control
device.Y our system must be configured and operated in such a way,
thatin case of an erroneous measurement, malfunction of the device
or powerfailure due to installed safety measures (e.g. safety limit
switch), it isassured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with householdwaste. Care
for theenvironment. Always prevent access to the product by
unauthorized personnel.
And take them to the collection points provided in accordance
withnational or local regulations. The product must not be disposed
of withhousehold waste. Dispose of the product appropriately in
accordance with the national regulations in force in your country.
Technical data
| Model | S20/S30 /S45 m instrument |
| Measuring range | 0.05 to 20M/30M/45M* |
| Measuring accuracy | Typica 1+ 2mm* |
| Display accuracy | 1mm |
| Laser classification | Class 2 |
| Pollution degree | 2 |
| Laser type | 620-690nm, < 1mW |
| 0.16x0.6 mrad, 0.25s |
| Area,V olume measuring | ● |
| Continuous measurement | ● |
| Show beep | ● |
| Protection against splashes and dust | IP54 |
| Temperature range for operation | 0°C ~+40°C |
| Temperature range for storage | - 20°C +70°C |
| Battery life | 5000 measurements |
| Battery selection | LR03(AAA)2X 1.5v |
| Laser switch-off automatically | After 30 seconds |
| Instrument switch-off automatically | After 3 minutes |
| Dimensions | 118X 39X 20MM |
| weight(without battery) | 70g |
| max. Operating altitude: 2000m; max.relative humidity: 0-95% |
Precautions:
Carry out periodic test measurements. P articularly after the
instrument hasbeen subject to abnormal use, and before, during and
after important measurements.
Make sure the optics is kept clean and that there is no mechanical
damageto the bumpers.
CAUTION:
In using the instrument for distance measurements or for
positioning
moving objects (e.g. cranes,building equipment, platforms, etc.)
UNforseen events may cause erroneous measurements.
Caution:
- Do not look straight at the laser beam
- Do not use the device in inflammable and explosive environment
- Remove the batteries to avoid the electrolyte leakage when not
use thedevice.
- Do not try other functions that the device does not have itself
- Do not attempt to convert the performance of the device in any
way
