Red Color Small Size Digital Laser Distance Meter T 5000 To 8000
Measurements
WARNING:
Looking directly into the beam with optical lens ( e. g.
binoculars, telescopes )can be hazardous. Precautions: Do not look
directly into the beam withoptical lens.
CAUTION:
Looking into the laser beam may be Ihazardous to the eyes.
Precautions:
Do not stare into beam. Do not look into thelaser beam. Make sure
the laser is aimed above or below eye level (particularly withfixed
installations, in machines, etc.)
Technical data
| lTEM | 40m instrument | 70m instrument | 100m instrument |
| Measuring range | 0.05 to 40M* | 0.05 to 70M * | 0.05 to 100 M* |
| Measuring accuracy | ±2mm** |
| Display accuracy | 1mm |
| Laser classification | Class 2M II |
| Laser type | 620-690nm,<1mW |
| Area, Volume measuring | ● |
| Indirect (Pythagoras) measurement | ● |
| Plus-minus method | ● |
| Marking | O |
| Timer measurement | O |
| Continuous measurement | ● |
| Minimum/maximum measurement | ● |
| Display illumination | ● |
| Show beep | ● |
| Mulifunctional end piece | O |
| Protection against splashes and dust | IP 54 |
| Temperature range for Operation | 0°C to +40°C |
| Temperature range for Storage | -20°C to +70°C |
| Battery life | 5000 to 8000 measurements |
| Battery selection | Lr6 (AA)2x 1.5V |
| Laser switch-off automatically | After 30 seconds |
| nstrument switch- off automatically | After 3 minutes |
| Dimensions | 121 x56x28 mm |
| Weight | 150g |
Permitted use
- Measuring distances
- Computing functions, e.g. areas and volumes .
- Indirect measurement(Pythagorasproposition) .
- Plus or minus measurement .
- Tilt measurem ent Prohibited use.
- Using the instrument without instrument .
- Using outside the stated limits .
- Deactivation of safety systems andremoval of expl anatory and
hazard labels .
- Opening of the equ ipment byusingtools (screw- drivers ,etc.), as
far asnot specifically permitted for
certaincases .
- Carrying out modificationor conversion of the product .
- Use after misapp ropriation .Use of accessories from other .
manufactures without the express
approval.
- Deliber ate orirres ponsible behaviour on scaffolding , when
usingladders, when me asu ring ne ar
machines which are running, or nearparts of machines or in
stallationswhich are unp rot ect ed, aimingdirectly into the sun.
- Del iberate dazzling of third parties ;also in the dark.
- Inade quate safe guards at the surveying site (e.g. w hen
measuringLimits of use .
