Unique Digital Distance Meter , Laser Distance Measuring Tool 118X
39X 20MM
Measuring range
The range of 20m instrument is limited to 20m. The range of 30m
instrumentis limited to 30m. The range of 45m instrument is limited
to 45m. At nightor dusk and if the target is in shadow, the
measuring range without targetplate is increased. Use a target
plate to increase the measurement range during daylight or if the
target has poor reflection properties.
Technical data
| Model | S20/S30 /S45 m instrument |
| Measuring range | 0.05 to 20M/30M/45M* |
| Measuring accuracy | Typica 1+ 2mm* |
| Display accuracy | 1mm |
| Laser classification | Class 2 |
| Pollution degree | 2 |
| Laser type | 620-690nm, < 1mW |
| 0.16x0.6 mrad, 0.25s |
| Area,V olume measuring | ● |
| Continuous measurement | ● |
| Show beep | ● |
| Protection against splashes and dust | IP54 |
| Temperature range for operation | 0°C ~+40°C |
| Temperature range for storage | - 20°C +70°C |
| Battery life | 5000 measurements |
| Battery selection | LR03(AAA)2X 1.5v |
| Laser switch-off automatically | After 30 seconds |
| Instrument switch-off automatically | After 3 minutes |
| Dimensions | 118X 39X 20MM |
| weight(without battery) | 70g |
| max. Operating altitude: 2000m; max.relative humidity: 0-95% |
Laser classification Integrated distance meter
That produces a visible laser beam which emerges from the front of
theinstrument.
It is a Class 2 laser product in accordance with:
IEC608251: 2007 R adiation safety of laser products Laser Class 2
products:
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion
responsesincluding the blink reflex.
Precautions:
Only use this product as a measuring sensor, not as a control
device.Y our system must be configured and operated in such a way,
thatin case of an erroneous measurement, malfunction of the device
or powerfailure due to installed safety measures (e.g. safety limit
switch), it isassured that no damage will occur.
WARNING:
Flat batteries must not be disposed of with householdwaste. Care
for theenvironment. Always prevent access to the product by
unauthorized personnel.
And take them to the collection points provided in accordance
withnational or local regulations. The product must not be disposed
of withhousehold waste. Dispose of the product appropriately in
accordance with the national regulations in force in your country.
